How to Sight in a Compound Bow With 3 Pin Sights?

Sighting-In is the procedure of adapting or tailoring your sight to consistently hit the main point on your sight-in target.

One of the major problems I had with archery when I first started in the game was sighting a compound bow with three-pin sights. I just had a problem understanding how to sight and it frustrated me – well not for long because I soon found how to.

One of the most discussed topics on archery has had to be sighted on a compound bow with three-pin sights.

Every archer knows it’s a little complicated – but not hard. And then I thought since I know, why not share?

The first thing you need to understand is that you have to always hold on to the same kind of arrow when sighting on a bow. The design point, weight point, and spine all influence the behavior of flight.

Before you begin sighting on any bow, ensure the string and bow are both broken in. Sometimes, it is simply better to prepare your range of target instead of utilizing an archery range.

When making use of a new sight, it needs to be carefully handled, particularly when fastening in pins. Sometimes, cheaper sights might get over-tightened and can cause damage to the socket of the pin rendering it almost impossible to perform any further changes.

If properly attended to, a calibrated compound bow and its three-pin sight might not need any further changes or adjustment for a very long while.

Heed these simple instructions to help you properly sight in your compound bow. These instructions will help you learn and sight faster. Know that sighting in a bow is a procedure that shouldn’t be done in a hurry.

The further you are properly able to spread your calibration, the better. Recall that you might just need to ever do this only about two to three times, irrespective of the bow you’re making use of, hinging on your level of skill and proficiency in archery.

How To Sight In A Compound Bow With 3 Pin Sights

1. Set Your 3-Pin Sight

First, start with setting your 3-pin sight on the compound bow. Ensure you adhere to all instructions concerning installation that have been provided for you. Maintain the sight to the riser as informed.

This takes only a few bolts that fasten to the craters in your riser that have been pre-drilled. Ensure the sight of your bow has been given enough time overnight to settle.

Tighten the sight the next day to guarantee resilience and strength.

2. Sighting pin shifts

Fix all the sighting pin shifts to the middle making use of an Allen wrench.

3. Fix Your Target

Most of the shooters dot each of the 10-yard increments away from their targets. Ensure that your targets will stay through the whole calibration drill.

Intend for the distance that is closest to your mark. Most archers like to fix this at about 10-yards. Determine your viewpoint, pull and fire an arrow at the mark, pushing with your site’s main pin.

Shoot off some more shots moving the sight box upward. Do this again if your arrows fired above the area specified by the pin.

As soon as the initial length is correctly calibrated, move to twice the length away (most archers prefer 20 yards) and perform the exact sighting procedure.

Lift the sighting box as is vital. Immediately you are sure that your arrows are no longer firing above the main pin, commence altering the sight for arrows firing extremely far to the right or left.

The initial pin is inclined to proceed once the others have been fixed. It is important to aim for an elevated level of precision but there’s no necessity to get it accurately.

4. Fix The Pins

Try aiming at the gap that is closest to your mark or target. Most archers love to fix at ten yards. Take your stance, pull, and shoot your arrow at the target, pointing with the top pin of your sight. Fire off more shots moving the sight box.

Allow it to face upwards if you noticed that your arrows flew above the point specified by the pin. Continue until you are fully sure that your arrows are not being shot above the top pin.

Immediately you’re able to accurately calibrate the first distance, try doubling the space away (a maximum of 20 – yards), and perform the same sighting procedure.

Lift the sighting box as much as you need to and once you’re fully sure that your arrows are no longer. being shot above the top pin, start adjusting the sight for arrows shooting too far to the right or left.

The first pin is more inclined to move immediately once the others have been fixed. So, it’s important to attempt an elevated degree of precision but there’s no need to get it exactly accurate.

Now, perform similarly for the other two pins tightening each one until you achieve your desired aim. The yard measurement for the second and third pins are 30 and 40 yards respectively, Judging from your target’s distance.

How much do you love archery? I hope you have a nice time sighting in a compound bow with 3 pin sights.